22
LED Illumination ................................... [Disable, Enable]
This parameter can be used to activate the nanoKEY Studio
LED illumination after a set period of time has passed with no
operations being performed. Set this to “Enable” so that the
LEDs will light up or to “Disable” so that they will not light up. If
the Keyboard, Knobs, etc. are operated while the LED Illumina-
tion is active, the nanoKEY Studio returns to its previous condi-
tion. This setting is applied whether the nanoKEY Studio is op-
erating with a USB connection or on batteries.
LED Eco Mode ........................................ [Disable, Enable]
This parameter specifies whether to use the mode that dims the
LEDs. Set this to “Enable” so that the LEDs will be dimmed or to
“Disable” so that the LEDs will light up as usual. When this pa-
rameter is set to “Enable”, the battery consumption will be re-
duced when the nanoKEY Studio is operating on batteries. This
setting is applied whether the nanoKEY Studio is operating with
a USB connection or on batteries.