Korg nanoKey Page 16 Owner'S Manual Download | Manualshive

Page: 16 / 27

background image

16

MIDI messages from the Knobs.
When set to “Global”, MIDI messages will be transmitted on the
Global MIDI Channel, specified in the global parameters.

CC Number ........................................................... [0...127]

This parameter specifies the CC number of the control change
message that will be transmitted.

Left Value ............................................................. [0...127]

This parameter specifies the value of the control change mes-
sage that is transmitted when you turn the Knob fully to the
left.

Right Value ............................................................ [0...127]

This parameter specifies the value of the control change mes-
sage that is transmitted when you turn the Knob fully to the
right.

Touchpad (Touch Scale mode)

MIDI Channel ............................................. [1...16, Global]

This parameter specifies which MIDI channel is used to transmit
MIDI messages when using the Touchpad in the Touch Scale
mode. When set to “Global”, MIDI messages will be transmitted
on the Global MIDI Channel, specified in the global parameters.

Y-axis Enable .......................................... [Enable, Disable]

This parameter specifies whether to enable or disable the trans-
mission of control change messages when you move your fin-
ger along the Y-axis in the Touchpad.

Y-axis CC Number ................................................. [0...127]

This parameter specifies the value of the control change mes-
sage that will be transmitted.

Y-axis Lower Value ................................................ [0...127]

This parameter specifies the value of the control change mes-
sage that is transmitted when you touch the bottom edge of the
Touchpad.

Y-axis Upper Value ............................................... [0...127]

This parameter specifies the value of the control change mes-
sage that is transmitted when you touch the top edge of the
Touchpad.

Touchpad (X-Y Control mode)

Toutch/Release

CC

CC

Touchpad

CC

CC

Touchpad

X-axis/Y-axis

MIDI Channel ............................................. [1...16, Global]

This parameter specifies which MIDI channel is used to transmit
MIDI messages when using the Touchpad in the X-Y Control
mode. When set to “Global”, MIDI messages will be transmitted
on the Global MIDI Channel, specified in the global parameters.

«
...
14
15
16
17
18
...
»

Summary of Contents for nanoKey




























Reviews:

No comments

Related manuals for nanoKey

Brand: Ectaco Pages: 39

Brand: Digitsole Pages: 9

Brand: Man & Machine Pages: 6

Brand: Conrad Pages: 50

Brand: Belkin Pages: 8

Brand: Hohner Pages: 25

Electronic Parking Disc 3

Brand: Jacob Jensen Pages: 17

Liberation Domestic 338A

Brand: Moog Pages: 13

digital basics 2-in-1 air keyboard HQ

Brand: Digital Gadgets Pages: 11

Brand: Bosch Pages: 2

IntuiKey Series

Brand: Bosch Pages: 32

Brand: Bosch Pages: 40

IntuiKey Series

Brand: Bosch Pages: 50

PortaSound TYU-40

Brand: Yamaha Pages: 15

PortaSound PSS-80

Brand: Yamaha Pages: 16

PortaSound PSS-6

Brand: Yamaha Pages: 15

Portatone DSR-1000

Brand: Yamaha Pages: 29

Portatone DSR-500

Brand: Yamaha Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands