Arp & Setup page
50
Rx Other CCs
[Off, On]
On:
This is the default. The Layer will respond normally to MIDI CCs.
Off:
The Layer will ignore all MIDI CCs (except for CC#64), as well as Aftertouch, Poly Aftertouch, and Pitch Bend.
Program Setup
Volume
[-Inf, -84.9…0.0 dB]
This controls the overall volume of the Program, for volume-balancing with other sounds.
Transpose
[-60…+60 semitones]
This transposes the Program by up to +/- five octaves, in semitones.
Random Pitch Range
[0.0…50.0 cents]
This parameter creates random variations in pitch for each note. At the default of
0.0
, pitch will be completely stable;
higher values create more randomization. This can be helpful for simulating instruments that have natural pitch
instabilities, such as analog synths, tape-loop keyboards, or acoustic instruments.
Trigger
Trigger On
[Key-On, Key-Off]
Key-On:
This is the default setting, in which the Program is played when a key is pressed.
Key-Off:
The Program will play as soon as you release the key. You can use this to create the “click” heard when a
harpsichord note is released, for instance. In general, when using
Key-Off
it’s also best to set the Amp Envelope Sustain
to
0
.
Voice Allocation
Mode = Poly
(Voice Assign) Mode
[Poly, Mono]
This selects the basic voice allocation mode. Depending on which one you select, various other options will appear,
such as Single Trig (
Poly
mode only) and Mono Legato and Priority (
Mono
mode only).
Poly
: The Program will play polyphonically, allowing you play chords.
Mono
: The Program will play monophonically, producing only one note at a time.
Single Trigger
[Off, On]
Single Trigger is available when Voice Assign Mode is set to
Poly
.
On:
When you play the same note repeatedly, the previous note will be silenced before the next note is sounded, so that
the two do not overlap.
Off:
When you play the same note repeatedly, the notes will overlap.
Max # of Notes
[Dynamic, 1…32]
Max # of Notes is available when Voice Assign Mode is set to
Poly
.
Dynamic
is the default. With this setting, you can play as many notes as the system allows.
1-64
limits the number of notes played by the Program. Voices will be allocated dynamically up to this maximum. You
can use this to: