Randomize
89
Randomize
Randomize uses a combination of preset selection and select value randomization, rather than direct randomization of
all parameters.
Using Randomize
To randomize the entire Performance:
1.
Press the (Randomize) button.
The Randomize page will appear, with
Scope
set to
Performance
by default. If
Scope
has been previously changed to
another setting, hold and press
PERFORM
.
Depending on the Scope, additional settings may appear:
Fx/Mod Knob Values
randomizes the Mod Knobs (Program and/or Performance, according to
Scope
) and Effects
Edit 1/2/3
by the specified percentage.
Modulation Intensities
randomizes the standard LFO and Envelope intensities for Filter, Amp, Osc 1/2, and Pitch.
Randomize Fx Enables
controls the On/Off settings for the Effects (with probability weighted towards On).
2.
Press again to randomize everything in all layers, and then
ENTER
to confirm.
To randomize a specific section of the synth:
1.
Press and hold .
2.
While holding , press the button for the desired section (
PERFORM
,
WAVE SELECT
,
SEQ STEPS
,
ARPEG-
GIATOR
,
FILTER TYPE
,
AMP
,
PITCH
,
LAYER A/B
, or any Effect); press a Motion Sequence Lane button
(pressing
SHIFT
is not required for Lane selection here); or move a Filter or MOD knob.
The Randomize page will appear, with the selected
Scope
. You can still change the
Scope
again, if desired. Additional
Scope
options are available from the on-screen menu.
3.
Press to execute the randomization, and then
ENTER
to confirm.
