Selecting and Playing Sounds
6
If you select a sound using the display, buttons
1-16
will go dark. To return to the Set List, just press one of the buttons
again.
You can store many different Set Lists, and switch between them as desired. To select a different Set List:
1.
Press UTILITY twice, to go to the System Setup page.
2.
Select the Set List parameter, and press
ENTER
or turn the
VALUE
knob.
From this point, selecting Set Lists works just like selecting Performances, as described above.
Assigning a Performance to a Set List Slot
1.
Select the Performance that you’d like to assign.
2.
Press the
SET LIST
button, so that it is lit.
3.
Hold
WRITE
and press the Slot to which you’d like to save.
The Write page appears, with that Slot already selected. To change the Slot, hold
WRITE
and press a different Slot
button.
4.
Press
WRITE
, and then
ENTER
to confirm.
The Set List will also be saved. If the Performance has been edited, you’ll be prompted to save it too.
Assigning to a Slot in a different bank
While you’re on the Write page, you can also select a Slot from a different bank (for instance, if you’re copying a
Performance to a different Slot):
1.
Hold
WRITE
and
SHIFT
(or, if you prefer,
WRITE
and
SET LIST),
and press button
1-4
for the desired Bank.
2.
Release
WRITE
and
SHIFT
.
3.
Proceed to Step 3 above.
