IP67 / IP68 Industrial Ethernet Switch
76
www.korenix.com
3.10.3.
SysLog Configuration
System Log is useful in providing the system administrator both local and
remote monitoring of the switch’s history. There are 3 System Log modes, local,
remote and both.
Local
In this mode, the device will print selected past events (selected in
the Event Selection page) to the System Log table. You can monitor
the system logs in the [Monitor and Diag] / [Event Log] page.
Remote The remote mode is also known as Server mode. In this mode, you
should assign the IP address of the System Log server. The device will
send the selected occurrences, selected on the Event Selection page,
to the System Log server that you have assigned.
Both
The 2 modes mentioned above can be enabled at the same time.
When enabling Local or Both modes, you can monitor the system logs in
[Monitor and Diag] / [Event Log] page.
Once you have finished configuring the settings, click the Apply button to apply
your configuration.
3.10.4.
SMTP Configuration
The switch includes an E-mail Warning feature. The switch will send event
warnings to a remote E-mail server. The receiver can then receive an E-mail
notification by according to SMTP standards.
The web page allows you to enable the E-mail Alert, and assign the SMTP Server
IP, Sender E-mail, and Receiver E-mail. Enter the username and password if
authorization is required to login the SMTP server.
