9
its operating system supports TCP/IP protocol.
2.
Turn on the switch and connect the switch to your computer.
3.
Make sure the device is properly connected to your local network, and its IP
configuration is on the same subnet. Simply use JetView to discover the
device and change its IP address.
4.
Use the DOS command “ping” to verify if the network connection between the
switch and your computer is working correctly.
2.3.
Preparation for Web Management
JetRock provides both HTTP Web interface and Secure HTTPS Web interface for
management. The
web page uses JavaScript which allows you to use a standard
web browser such as Microsoft Internet Explorer or Mozilla FireFox to configure
the switch from anywhere while connected to the network.
2.3.1.
HTTP Web Interface
1.
Launch web browser.
2.
Connect URL of the device. The URL of the device is its IP address, for
example
for the default IP address or the IP address
you assigned to it.
3.
Login user name and password. The default username and password is
admin/admin.
Click OK. The welcome page of the web-based management interface will now
appear.
