73
Power Failure
Power ID
Select either Power 1 or Power 2. When power is shut down,
the system will short Relay Out and light the DO LED.
Link Failure
Link
Select the port ID you would like to monitor. Check the box of
the Ethernet ports you wish to monitor. You may select
multiple ports. When the selected ports are unlinked, the
system will short Relay Output and light the DO LED.
Ping Failure
IP Address:
Enter the IP address of the target device you want to ping.
Reset Time (Sec) Enter the amount of time after ping has failed that you would
like the relay output to turn off
Hold Time (Sec)
Enter the amount of time after ping has failed and relay
output has been turned off, that you would like the relay
output to be turned back on.
