![Korenix JetRock Series User Manual Download Page 53](http://html.mh-extra.com/html/korenix/jetrock-series/jetrock-series_user-manual_1997872053.webp)
IP67 / IP68 Industrial Ethernet Switch
52
www.korenix.com
Spanning-Tree BPDU transmission-limit 3
Bridge identifier has priority 4096, address 0012.77ff.0102
Configured hello time 2, max age 10, forward delay 15
Current root has priority 4096, address 0012.7701.0386
Root port is 7 , cost of root path is 200000
Topology change flag not set, detected flag not set
Number of topology changes 0, last change occurred from
0000.0000.0000
Times: hello 2 , max age 20 , forward delay 15
Timers: hello 0 , topology change 0
Rapid Spanning-Tree link-type : Shared
Rapid Spanning-Tree edge-port : Disabled
Port 128.7 as Root Role is in Forwarding State
Port Path Cost 200000, Port Identifier 128.7
Designated root has priority 4096, address 0012.7701.0386
Designated bridge has priority 4096, address 0012.7701.0386
Designated Port ID is 128.1, Root Path Cost is 0
Timers : message-age 4 sec, forward-delay 0 sec
Forwarding-State Transmit count 2
BPDU: sent 624 , received 3600
TCN : sent 0 , received 0
Rapid Super Ring
Create or configure a
Ring
Switch(config)# multiple-super-ring 1
Ring 1 created
Switch(config-super-ring-plus)#
Note: 1 is the target Ring ID which is going to be created or configured.
Super Ring Version
Switch(config-super-ring-plus)# version
default set default to rapid super ring
rapid-super-ring rapid super ring
super-ring super ring
Switch(config-super-ring-plus)# version rapid-super-ring
Priority
Switch(config-super-ring-plus)# priority
<0-255> valid range is 0 to 255
default set default
Switch(config-super-ring-plus)# priority 100
Ring Port
Switch(config-super-ring-plus)# port
IFLIST Interface list, ex: fa1,fa3-5,fa8-10