17/27
F i l t e r C o n t r o l F S - 2 1
FS-21.doc | Status 2015 - 02 - 09
6
Service
The
Service
menu contains settings and display views which are mainly relevant for the
system manufacturer.
Note
: Activating / deactivating of maintenance messages as well as editing of the message
text can only be done by parameterisation – software. The settings of the running times for
the service messages also is possible directly on the device.
6.1
Service Message
If a value greater than 0 is set here, a service message appears after the set number of
days.
setting range: 0 .... 9999
If the value 0 is set here, the Message After Days function is not active.
If a value greater than 0 is set here, a service message appears after the set number of
regeneration cycles.
setting range: 0 .... 9999
If the value 0 is set here, the Message After Cycles function is not active.
6.2
Service Reset
The counter for service messages after days and cycles are reset.
7
Operation Value Settings
The Operating Value menu is provided so that the system operator can change operating
values quickly and easily. The most important setting values can be changed here without
having to scroll through all the menus.
The following operating values can be edited, depending on the filter configuration:
Step timings
Filter capacity / Raw water hardness
Regeneration release times
Settings for the display view
Date / Time
7.1
Regeneration Counter
The counter displays the number of regenerations which have been completed since the
last RESET.
6
Message after Days
90
Message after Cycles
15
Service Reset
Reset
Regeneration Counter
3
7
