10/27
F i l t e r C o n t r o l F S - 2 1
FS-21.doc | Status 2015 - 02 - 09
3.4.1 Editing
Parameters
After having selected a parameter option whose value you want to change, it can be edited
as follows:
press the Enter – key
The last digit in the number flashes;
press the Up – or Down – key to change the value;
press the Enter – key to skip to the next digit.
When all the digits have been changed and the last editable digit confirmed with 'Enter', the
values are saved. If you exit from editing by pressing the FKT key prior to completing editing
of the last digit, the old value remains unchanged.
Use the FKT key at this point to exit from this parameter option and skip to the next one.
Note:
If no parameter editing was started, press the FKT key to exit from this option and
skip directly to the next parameter option without changing the parameter. Not all the
parameters can be set by means of manual input on the control unit.
4
Starting Up
After switching the control unit on, certain setting adjustments must be carried out in order
to adapt the filter control to your specific filter system.
Basic settings can be entered directly on the control unit. Input can be made quickly and
easily using the parameterisation – software, which is supplied. The software is also
available as download on our homepage
4.1
Calling up Operation Values / Parameters
By actuating the Enter – key within the operation mode, the display of the device changes
over to the selection ‘Operation Values’ respectively ‘Parameters’. The respective menu
item is selected using the Up- or Down-key (
see chap. 3.4 Operating Concept
), and called
up actuating the Enter – key. If the parameter input lock is not activated ( default setting -
see below ), the values to be altered may now be edited, otherwise a prompt appears,
requesting the 4-digit PIN code.
4.1.1
Parameter
Input
Lock
Using the parameterisation software ‘Geräteverwaltung 2’ ( device management GV_2 ),
which is included in the delivery and also available for download on our homepage, a
separate parameter input lock can be set for both, the editing of Operation Values and
Parameters. This ensures, that only authorised personnel will be able to alter these values.
If the Parameter input Lock is activated, a prompt requesting the 4-digit PIN code appears
while calling up the respective menu item ( Operation Values or Parameters ). After the
respectively assigned PIN is correctly entered, the Operation Values, respectively the Para-
meters can be edited.
Note:
If no password or an incorrect PIN is entered, the operating values and parameters
will only be displayed, and can not be altered.
The parameter setting options are described below.
4
3
