9/27
F i l t e r C o n t r o l F S - 2 1
FS-21.doc | Status 2015 - 02 - 09
3.4
Operating Concept
Parameter configuration is distributed amongst several parameter menus. The respective
parameter options are contained in these menus. The parameter options can be accessed
as follows by press the Enter – key in one of the menus; press the FKT (Function) key to
exit from the menu.
Note: Not all the parameters can be set by means of manual input on the control unit.
The menus are selected according to the operating concept illustrated below:
3
