Kontron speedMOPSlcdCE, User Manual

Page: 77 / 99

KONTRON
speedMOPSlcdCE User’s Guide 69 Appendix B:BIOS Operation
24.6
Power Menu
In the BIOS Setup Utility, you can set up an Advance Power Management system (APM 1.2) to
reduce the amount of energy used after specified periods of inactivity. The setup menu supports:
 Full On State
 Standby State with Partial Power Reduction
 Suspend State with Full Power Reduction
Feature Option Description

Thermal Management * Sub menu Opens Thermal Management
sub menu.
Power Savings Disabled
Customized
Maximum Power Savings
Maximum Performance
Maximum options select
predefined values.
Select Customized to make
selections from the following fields.
Disabled turns off
power management.
Hard Disk Timeout Disabled , 10 sec – 15 min Inactivity period of hard disk required
before standby (motor off).
Video Timeout Disabled , 10 sec – 15 min Inactivity period of user input device
before the screen is turned off.
Resume on Modem Ring Off
On
Enabled wakes system on incoming
calls detected by mode (RI).
Resume on Time Off
On
Enabled wakes the system
at a specific time.
Resume Time 00:00:00 Specifies time when system wakes.
Power Button Function Power Off
Sleep
Determines if the system enters
suspend or soft off when the power
button is pressed.
Power Loss Control Stay Off
Power On
Last State
Determines how the system behaves
after a power failure. This only works
in conjunction with a CMOS backup
battery.
Notes : In the Option column, bold indicates default setting.
(*) See the chapter “Thermal Management” of this user’s guide
for more details about these features.