![Kontron speedMOPSlcdCE User Manual Download Page 61](http://html1.mh-extra.com/html/kontron/speedmopslcdce/speedmopslcdce_user-manual_1996506061.webp)
KONTRON
speedMOPSlcdCE User’s Guide
53
Appendix A: System-Resource Allocation
23.4
I/O Address Map
The I/O-port addresses of the speedMOPSlcdCE are functionally identical with a standard PC/AT. All
addresses not mentioned in this table should be available. We recommend that you do not use I/O
addresses below 0110hex with additional hardware for compatibility reasons, even if available.
Address (h)
Use
Available
Comment
0000 - 001F
DMA Controller 1
No
Fixed
0020 - 003D
Interrupt Controller 1
No
Fixed
002E - 002F
LPC Super I/O
No
Fixed
0040 - 0053
Timer, Counter
No
Fixed
004E - 004F
LPC Super I/O
No
Fixed
0060 - 0067
Keyboard controller
No
Fixed
0070 - 0077
Real Time Clock and
CMOS Registers
No
Fixed
0080 - 008F
DMA Page Register
No
Fixed
0090 - 009F
DMA Control
No
Fixed
0092
Reset Generator
No
Fixed
00A0 00BF
Interrupt Controller 2
No
Fixed
00C0 - 00DF
DMA Controller 2
No
Fixed
00E1 - 00E2
System Control
No
Fixed
00F0
Math. Coprocessor
No
Fixed
0100 - 010F
General Purpose I/O
No
Kontron Control Port, Fixed
0170 - 0177
Hard Disk Drive
(Secondary)
No
Available if IDE port 2 is disabled
01F0 - 01F7
Hard Disk Drive (Primary)
No
Available if IDE port 1 is disabled
0200 - 026F
System Resources
No
Fixed
0274 - 0279
ISA PNP Data
No
Fixed
0278 - 027F
LPT
Yes
Possible address for LPT
0290 - 0297
System Resources
No
Fixed
02F8 - 02FF
COM2
No
Available if COM is disabled
0376
IDE Controller 2
No
Available if IDE port 2 is disabled
0378 - 037F
LPT
No
Available if LPT is disabled
03B0 - 03DF
Graphic Subsystem
No
Fixed
03F0 - 03F7
Floppy Controller
No
Available if floppy controller is disabled
03F6
IDE Controller 1
No
Available if IDE port 1 is disabled
03F8 - 03FF
COM1
No
Available if COM is disabled
04D0 - 04D1
Interrupt Select
No
Fixed
0600 - 060F
System Resources
No
Fixed
0678 - 067F
ECP LPT
Yes
Used when LPT mode is set to ECP
0778 - 077F
ECP LPT
Yes
Used when LPT mode is set to ECP
0A79
ISA PNP Data
No
Fixed
0CF8 - 0CFF
PCI Configuration
No
Fixed
1000 - 107F
System Resources
No
Fixed
1180 - 11BF
System Resources
No
Fixed
1800 - 181F
USB Host Controller
No
Dynamic (address if all PCI onboard devices are on)
1C00 - 1C0F
Ultra ATA Storage
Controller
No
Dynamic (address if all PCI onboard devices are on)
2000 - 201F
SM-Bus Controller
No
Dynamic (address if all PCI onboard devices are on)
2400 - 243F
Sound
No
Dynamic (address if all PCI onboard devices are on)
2800 - 28FF
Sound
No
Dynamic (address if all PCI onboard devices are on)
3000 - 30FF
Ethernet Contr. DM9102
No
Dynamic (address if all PCI onboard devices are on)
3400 - 343F
Ethernet Contr. Intel
No
Dynamic (address if all PCI onboard devices are on)
Summary of Contents for speedMOPSlcdCE
