mITX-SKL-H – User Guide, Rev.1.1
www.kontron.com
// 88
Function
Second level Sub-screen / Description
Serial IO
Configuration>
(continued)
Serial IO Timing
Parameters>
Serial IO Timing Parameters>
Serial IO timing parameter ( test only)
UCSI/UCMC
Device>
If enabled, ACPI reports UCSI/UCMC device
ISH
Configuration>
ISH Controller>
Enable/disable integrated sensor hub
PDT Unlock Message>
Enable/disable sending of PDT unlock message to ISH(checked state)
After sending, the field is set back to unchecked automatically.
SPI>
Enable/disable SPI
UART0/ UART1>
Enable/disable UART0 / UART1
I2C0/ I2C1/ I2C2>
Enable/disable I2C0 / I2C1 / I2C2
GP_0 – GP_7>
Enable/disable GP_0 / 1 / 2 / 3/ 4 / 5 / 6 / 7
TraceHub
Configuration
Menu>
TraceHub Enable
Mode>
Select enable /disable or debugger
Memory Region 0
Buffer Size>
Selects size of memory region 0 or 1 buffer size
Memory Region 1
Buffer Size>
PCH Thermal
Throttling
Control>
Thermal Throttling
Level>
Determines if the Intel suggested setting is used or a manual setting
DMI Thermal Setting>
SATA Thermal
Setting>
SB Porting
Configuration>
SB Porting Configuration
DCI Enable
(HDCIEN)>
Enable/disable DCI to consent to debugging over USB3 interface
DCI Auto Detect
Enable>
Enable/disable detection of a DCI connection during BIOS post time ad enables DCI
Debug Port
Selection>
Selects kernel debug port and report in ACPI DBG2 table
GNSS>
ISH – GNSS is connected to ISH. Serial IO UART – GNSS is connected to serial IO
PCH LAN
Controller>
Enable/disable onboard NIC
DeepSx Power
Policies>
Configure DeepSX mode configuration
Lan Wake From
DeepSx>
Enable/disable wake from DeepSx by the assertion of LAN_Wake# pin
Wake On LAN>
Enable/disable integrated LAN to wake the system
SLP_LAN# Low
on DC Power>
Enable/disable SLP_LAN# low on DC Power
K1 OFF>
Enable/disable K1 off feature (CLKREQ)
