mITX-SKL-H – User Guide, Rev.1.1
www.kontron.com
// 16
4.2.
Component Main Data
The table below summarizes the main features of the mITX-SKL-H embedded motherboard components.
Form Factor
mITX-SKL-H – 170mm x 170 mm x 1.6 mm (PCB)
Height approx. 50 mm from top of heat sink (highest point) to bottom of PCB ( lowest point)
Processor
6
th
Generation Intel ® Skylake-H processors
BGA 1440 (14 nm), CPU variants (TDP 25 W-45 W)
Memory
System memory
DDR4 non-ECC/ECC SO-DIMM 1866/2133 (2 sockets)
Dual channel DDR4 memory interface
Support system memory up to 32 GB (2 x 16 GB)
SPI BIOS Memory
/Firmware
On-board 16 MB for system BIOS Winbond W25Q128FVSIG, Micron Technology
N25Q128A13ESE40E or Macronix MX25L12835FM2I-10G
On-board 4 MB SPI Flash for embedded controller firmware and board information SPI
connector for external BIOS hard flash
Chipset
Mobile Intel ® CM236 Chipset
Intel ® VT-d (Virtualisation Technology for Directed I/O)
Intel ® TXT (Trusted Execution Technology)
Intel ® vPRO
Intel ® ME Firmware Version 11.0
Intel ® HD Audio Technology
Intel ® Rapid Storage Technology
Intel ® Rapid Storage Technology Enterprise
SATA (Serial ATA) Gen 3
USB revision 2.0
USB revision 3.0
PCI Express revision 3.0
ACPI 6.0 compliant
HD video playback
Security
WIBU CodeMeter ASIC 1504-03
Safenet sentinel HL Chip ( Optional)
Trusted Platform Module (TPM) 2.0 support
Management
Intel ® Active Management Technology (Intel ® AMT) 9.0
Audio
High Definition Audio Realtek ALC886 HDA codec
Line-in and Line-out
Microphone: MIC1 and MIC2
SPDIF-Out (electrical interface only)
On-board speaker (Electromagnetic Sound Generator like Hycom HY-05LF)
Video
Intel ® Generation 9 Graphics including Intel ® HD Graphics 510, Intel ® HD Graphics 530 or
Intel ® HD Graphics P530
Three DP (Display Ports), comply with Display Port 1.2 specification
HDMI panel support via DP to HDMI Adapter Converter
DVI panel support via DP to DVI Adapter Converter
VGA panel support via DP to VGA Adapter Converter
LVDS panel support up to 2 channel 24-bit color (VESA and JEIDA)
Triple independent pipes for Mirror or Triple independent display support
Triple independent pipes for triple independent or cloned displays supported from OS.
Any three displays via DP1, DP2, miniDP and LVDS can be used.
I/O Control
Via ITE IT8528E Embedded Controller via LPC Bus interface
