mITX-SKL-H – User Guide, Rev.1.1
www.kontron.com
// 85
Function
Second level Sub-screen / Description
SATA and RST
Configuration>
(continued)
SATA Test Mode>
Enable/disable test mod
SAT Feature Mask
Configuration>
HDD Unlock>
Enable/disable HDD password unlock in OS
LED Locate>
LED/SGPIO hardware is attached and ping to
locate feature is enable on the OS
Aggressive LPM
Support>
Enable/disable PCH to aggressively enter link power state
SATA Controller
Speed>
Displays the SATA controller speed
Serial ATA Port #
(# = 0-7)
SATA0 M.2
SATA1 mSATA
SATA2 J10
SATA3 J12
SATA6 J11
SATA7 J13
SATA0 M.2:>
Unknown software preserve
Software Preserve>
Enable/disable SATA Port
Port #>
Designates port as hot pluggable
Hot Plug>
Hot plug supported
Configured as eSATA>
Enable/disable spin up device
Spin Up Device>
Identify if SATA port is connected to solid
state drive or hard disk drive
SATA Device Type>
Identify the SATA Topology if it is default or
ISATA or Flex or Direct Connect or M2
Topology>
Enable/disable SATA Port# DevSlp
SATA Port# DevSlp>
Enable/disable DITO configuration
DITO Configuration>
Display DITO value
DITO Value>
Display DM value
USB
Configuration>
XHCI Disable
Compliance Mode>
Option to disable compliance mode
True -disables compliance mode. (Default is false)
xDCI Support>
Enable/disable xDCI (USB OTG device)
USB Port Disable
Override>
Enable/disable corresponding USB port from reporting a device connection
to the controller
Security
Configuration>
RTC Lock>
Enable/disable RTC lock
Enable- locks bytes 38h-3Fh in lower/upper 128 byte RTC RAM bank
BIOS Lock>
Enable/disable PCH BIOS lock enable (BLE bit) feature
HD Audio
Configuration>
HD Audio>
Control detection of the HD-audio device
Disable- HDA unconditionally disabled
Enable – HDA unconditionally enabled
Auto – HD enabled if present
Audio DSP>
Enable/disable audio DSP
Audio DSP Compliance
Mode>
Specifies DSP enabled system compliance
1/ Non-UAA (IntelSST driver support only -CC_0400100)
2/.UAA (HD audio inbox or IntelSST driver support-CC_040380)
HDA-Link Codec
Select>
Selects which of the following is used:
