mITX-SKL-H – User Guide, Rev.1.1
www.kontron.com
// 65
Sub-screen
Function
Second level Sub-screen/Description
CPU
Configuration>
(continued)
Intel (VMX)
Virtualization
Technology>
Enable/disable Intel (VMX) to use additional hardware capabilities provided
by Vanderpool Technology
PECI>
Enable/disable PECI
Active Processor
Cores>
Display number of cores to enable in each processor package
Hyper Threading>
Enable/disable OS optimized hyper-threading technology
Enable – Windows XP and Linux / Disable - other OS
BIST>
Enable/disable built-in self-test (BIST) on request
JTAG C10 Power>
Enable/disable power JTAG in C10 and deeper power states
AP Threads IDLE
Manner>
AP threads idle manner for waiting signal to run
AP Threads Handoff
Manner>
AP treads handoff to OS manner from end of post
AES>
Enable/disable Advanced Encryption Standard (AES)
Machine Check>
Enable/disable machine check
MonitorMWait>
Enable/disable MonitorMWait
Intel Trusted
Execution
Technology>
Enable/disable utilization of additional hardware capabilities provided by
Intel® Trusted Execution technology
Note: Changes require a full power cycle to take effect.
Alias Check Request
DPR Memory Size
(MB)>
Display alias check request DPR memory size (MB)
Reset AUX Content> Reset TPM Aux content
Note TXT may not be functional after Aux content is reset.
Flash Wear-Out
Protection>
Enable/disable flash wear-out protection feature
Current Debug
Interface Status>
Display current debug interface status
Debug Interface >
Enable/disable debug interface support
Debug Interface
lock>
Enable/disable debug interface lock
Processor Trace
Memory Allocation>
Select or disable processor trace memory region size (Range: 4 KB- 128 MB)
CPU SMM
Enhancement>
SMM Code Access
Check>
Enable/disable support for SMM code access
feature
SMM Use Delay
Indication>
Enable/disable usage of SMM_DELAYED MSR for
MP sync in SMI
SMM Use Block
Indication>
Enable/disable usage of SMM_BLOCKED MSR for
MP sync in SMI
FCLK Frequency for
Early Power-On>
Select EFCLK frequency values (400 MHz, 800 MHz, 1 GHz)
Voltage
Optimization>
Select voltage optimization option enable/disable/auto
