Kontron EPIC/CE, User Manual

Page: 84 / 101

24 Appendix B: BIOS Operation
Kontron User's Guide EPIC/CE 84
24.8 Exit Menu
The following sections describe the five options in Exit Menu. Pressing <Esc> does not exit this menu.
You must select an item from the menu to exit.
Feature Option Description
Exit Saving Changes
Saves selections and exits setup. The next
time the system boots, the BIOS configures
the system according to the Setup selection
stored in CMOS.
Exit saving changes.
Exit Discarding Changes
Exits Setup without storing in CMOS any new
selections you may have made. The
selections previously in effect remain in
effect.
Exit discarding changes.
Load Setup Defaults
Displays default values for all the Setup
menus.
Load setup defaults.
Discard Changes
If, during a Setup session, you change your
mind about changes you have made and
have not yet saved the values to CMOS, you
can restore the values you saved to CMOS.
Discard changes.
Save Changes
Saves all the selection without exiting
Setup. You can return to the other menus to
review and change your selection.
Save changes.
24.9 Kontron BIOS Extensions
Besides the Phoenix System BIOS, the EPIC/CE comes with a few BIOS extensions that support special
features. All extensions are located in the onboard Flash EEPROM. Some extensions are permanently
available; some are loaded if required during boot-up. Supported features include:
®
JIDA standard
®
Remote Control feature (JRC)
®
Onboard LAN RPL ROM
All enabled BIOS extensions require shadow RAM, which is loaded into the same 32K shadowed memory
block, if possible. However, if the system memory cannot find free memory space because all the memory
is already used for add-on peripherals, the BIOS extensions do not load.