CP6016
Introduction
ID 1022-3074, Rev. 2.0
Page 1 - 13
P R E L I M I N A R Y
Switches
DIP Switches
Three, two-position, onboard DIP switches, SW1, SW2, and SW3, for board
configuration
Reset Switch
One front panel hardware reset switch
HW Monitoring
LEDs
System Status LEDs:
•
I0/I1 (red/green):
Indicate the software status of the IPMI
controller
•
WD (green):
Watchdog Status
•
TH (red/green/amber):
Temperature Status
•
HS (blue):
Hot Swap Control
General Purpose LEDs:
•
LED 0..3 (red/green/amber): General Purpose / POST code
Gigabit Ethernet Status:
•
ACT (green):
Ethernet Link/Activity
•
SPEED (green / orange):
Ethernet Speed
•
SPEED ON (orange):
1000 Mbit
•
SPEED ON (green):
100 Mbit
•
SPEED OFF:
10 Mbit
Watchdog
Software configurable Watchdog generates IRQ or hardware reset.
Thermal Management
CPU overtemperature protection is provided by:
•
Internal processor temperature control unit
•
CPU shut down via hardware monitor
IPMI
Baseboard Management Controller (BMC) that supports two keyboard
controller-style interfaces (KCS) compliant with:
•
IPMI specification v1.5
•
PICMG 2.9 specification
IPMI supports two IPMB busses via the J1 and J2 connectors.
The BMC includes an integrated system monitor for the supervision of:
•
Several system power voltages
•
Two fan speed inputs
•
Processor, chipset and board temperature
Security
TPM
Trusted Platform Module (TPM) 1.2 for enhanced hardware- and software-
based data and system security
Table 1-1:
CP6016 Main Specifications (Continued)
FEATURES
SPECIFICATIONS
