CP6016
Introduction
ID 1022-3074, Rev. 2.0
Page 1 - 7
P R E L I M I N A R Y
1.4.2
Front Panel
Figure 1-2: CP6016 Front Panel
Legend:
IPMI LEDs
I0/I1 (red/green): Indicate the software status
of the IPMI controller
Status LEDs
WD (green): Watchdog Status
TH (red/green/amber): Temperature Status
HS (blue): Hot Swap Control
General Purpose LEDs
LED 0..3 (red/green/amber): General Purpose/POST code
Integral Ethernet LEDs
ACT (green): Ethernet Link/Activity
SPEED (green/orange): Ethernet Speed
SPEED ON (orange): 1000 Mbit
SPEED ON (green): 100 Mbit
SPEED OFF: 10 Mbit
Note ...
If the General Purpose LEDs are lit red during
boot-up, a failure is indicated before the uEFI
BIOS has started.
For further information, please contact Kontron.
