Introduction
CP6016
Page 1 - 12
ID 1022-3074, Rev. 2.0
P R E L I M I N A R Y
Interfa
ces
PMC
PMC interface:
•
Four onboard mezzanine connectors for standard PMC modules
•
64-bit / 66 MHz PCI or 64-bit / 133 MHz PCI-X interface with dedicated
PCIe-to-PCI-X bridge from Pericom (PI7C9X130)
•
Only 3.3V PCI signaling voltage
•
Rear I/O supported through the CompactPCI connector J4
•
Supported voltages: 3.3 V, 5 V, +12 V, and -12 V
XMC
XMC interface:
•
One onboard XMC connector
•
Up to x8 lanes PCI Express
•
Rear I/O supported through the PMC connector J23 (Jn4) to the
CompactPCI connector J4
Keyboard and Mouse
Keyboard and mouse are supported:
•
USB support
•
PS/2 (keyboard and mouse) on the rear I/O
Mass Storage
Onboard 2.5" HDD/SSD:
•
Onboard 2.5" hard disk drive (HDD) or solid state drive (SSD) is
supported via the SATA extension connector, J17, in combination with
the CP6001-EXT-SATA module
Onboard USB 2.0 NAND Flash:
•
Onboard USB 2.0 NAND Flash module supported on J14
SATA: Integrated Serial ATA Host Controllers
•
Provide independent DMA operation on six ports:
•
Two onboard SATA interfaces
•
Four SATA interfaces only on rear I/O
•
Data transfer rates up to 300 MB/s
•
High-performance RAID 0/1/5/10 functionality on all SATA ports
S
ockets
Front Panel Connectors
•
VGA: 15-pin, D-Sub connector, J9
•
USB: two 4-pin,
type A connectors, J6 and J7
•
Ethernet: three 8-pin, RJ-45 connectors, J10, J11 and J12
•
COM: one 8-pin, RJ-45 connector, J8
•
PMC/XMC front panel bezel cutout
Onboard Connectors
•
USB 2.0 NAND Flash connector, J14
•
PMC connectors J21 - J24 (Jn1 - Jn4)
•
XMC connector, J15
•
Two SATA connectors
•
One 7-pin, standard SATA connector, J16
•
One 12-pin, SATA extension connector, J17
•
JTAG connector, J25
•
XDP-SFF (debug) connector, J29
•
CompactPCI Connectors J1 - J5
•
Two 200-pin SO-RDIMM sockets, J18 and J19
Table 1-1:
CP6016 Main Specifications (Continued)
FEATURES
SPECIFICATIONS
