CP6016
Introduction
ID 1022-3074, Rev. 2.0
Page 1 - 5
P R E L I M I N A R Y
1.3
System Expansion Capabilities
1.3.1
PMC Module
The CP6016 has a 3.3V, rear I/O capable PMC mezzanine interface configurable for either
64-bit / 66 MHz PCI or 64-bit/133 MHz PCI-X operation. This interface supports a wide range
of PMC
modules with PCI interface including all of Kontron’s PMC modules and provides an
easy and flexible way to configure the CP6016 for various application requirements.
For information on the PMC interface, refer to chapter 2.3.8, "PMC Interface".
1.3.2
XMC Module
The CP6016 has one XMC mezzanine interface for support of x1, x4 and x8 PCI Express XMC
modules providing an easy and flexible way to configure the CP6016 for various application re-
quirements.
For information on the XMC interface, refer to chapter 2.3.9, "XMC Interface".
1.3.3
CP6016-MK2.5SATA Assembly Kit
The CP6016 comes with an optional CP6016-MK2.5SATA assembly kit comprised of one
CP6001-EXT-SATA module and the necessary components needed for mounting the module
on the CP6016. The CP6001-EXT-SATA module is required for connecting an onboard 2.5"
Serial ATA HDD or SSD to the CP6016.
For further information concerning the CP6001-EXT-SATA module, please refer to Appendix A.
1.3.4
USB 2.0 NAND Flash Module
The CP6016 provides support for one optional USB 2.0 NAND Flash module. For further infor-
mation, refer to chapter 2.2.6, "USB 2.0 NAND Flash Module".
1.4
Board Diagrams
The following diagrams provide additional information concerning board functionality and
component layout.
