Configuration
CP6003-SA
Page 4 - 14
ID 1044-9757, Rev. 2.0
P R E L I M I N A R Y
4.4.10
Board and PLD Revision Register (BREV)
The Board and PLD Revision Register signals to the software when differences in the board
and the Programmable Logic Device (PLD) require different handling by the software. It starts
with the value 0x00
and will be incremented with each change in hardware as development
continues.
4.4.11
Geographic Addressing Register (GEOAD)
This register holds the CompactPCI geographic address (site number) used to assign the In-
telligent Platform Management Bus (IPMB) address to the CP6003-SA.
Table 4-16: Board and PLD Revision Register (BREV)
REGISTER NAME
BOARD AND PLD REVISION REGISTER (BREV)
ADDRESS
0x289
BIT
NAME
DESCRIPTION
RESET
VALUE
ACCESS
7 - 4
BREV
Board revision
N/A
R
3 - 0
PREV
PLD revision
N/A
R
Table 4-17: Geographic Addressing Register (GEOAD)
REGISTER NAME
GEOGRAPHIC ADDRESSING REGISTER (GEOAD)
ADDRESS
0x28A
BIT
NAME
DESCRIPTION
RESET
VALUE
ACCESS
7 - 5
Res.
Reserved
000
R
4 - 0
GA
Geographic address
N/A
R
Note ...
The Geographic Addressing Register is set to the default values by power-on
reset, not by warm reset.
