CP6003-SA
SATA Flash Module
ID 1044-9757, Rev. 2.0
Page B - 3
P R E L I M I N A R Y
B.
SATA Flash Module
The CP6003-SA provides an optional SATA Flash module with up to 32 GB NAND flash mem-
ory. The SATA Flash module is connected to the CP6003-SA via the board-to-board connectors
J17 located on the CP6003-SA and J1 located on the SATA Flash module. The SATA Flash
module has been optimized for embedded systems providing high performance, reliability and
security.
B.1
Technical Specifications
Table B-1: SATA Flash Module Main Specifications
SATA FLASH MODULE
SPECIFICATIONS
Interface
Board-to-Board Connector
One 34-pin, male, board-to-board connector, J1
Memory
Memory
Up to 32 GB SLC-based NAND flash memory
•
Built-in full hard disk emulation
•
Up to 100 MB/s read rate
•
Up to 90 MB/s write rate
General
Power Consumption
typ. 0.5 W
3.3 V supply
Temperature Range
Operational:
0°C to +60°C
Standard
-40°C to +70°C
Extended (on request)
Storage:
-55°C to +85°C
Climatic Humidity
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Dimensions
70 mm x 28 mm
Board Weight
ca. 14 grams
Note ...
Write protection is available for this module. Contact Kontron for further assis-
tance if write protection is required.
