D R A F T — F O R I N
T E R N A L U S E O N L Y
63
www.kontron.com
User Guide
CP3010-SA
7.5.5 Peripheral Control Interface
A power supply with power management can be connected to the CP-RIO3-04 rear transition module
via the peripheral control connector J13.
The following table provides pinout information for the peripheral control connector J13. Refer to the
module layout for connector and pin locations.
7.5.6 SATA Interfaces
The onboard SATA connectors J5 and J6 allow the connection of standard HDDs / SSDs and other SATA
devices to the CP-RIO3-04 rear transition module.
Table 43: Peripheral Control Connector J13 Pinout
PIN
SIGNAL
DESCRIPTION
I/O
1
GND
Signal ground
--
2
PWR_5VSTDBY
+5V standby power (optional)
I
3
RSV
Reserved
--
4
VCC5V
Power +5V
O
5
RSV
Reserved
--
6
VCC3V3
Power +3.3V
O
7
PWR_SLPS3#
Power supply sleep mode
O
8
GND
Signal ground
--
9
PWR_BTN#
Wake-up / sleep input
I
10
GND
Signal ground
--
