D R A F T — F O R I N
T E R N A L U S E O N L Y
17
www.kontron.com
User Guide
CP3010-SA
Inter
faces
DisplayPort
Two DisplayPort interfaces (DVI/HDMI-capable through passive cable adapter) for
connection to monitors
Gigabit Ethernet
Three 10 Base-T/100 Base-TX/1000 Base-T Gigabit Ethernet interfaces based on
three Intel® I210-IT Ethernet controllers:
» Two interfaces with Wake-on-LAN support and individually switchable to front
I/O or rear I/O
» One interface available on the high-speed I/O extension connector, J7, for
the CP3010-HDD
USB
Four USB ports:
» One USB 3.0 port on the front I/O
» One USB 2.0 port on the front I/O
» Two USB 2.0 ports on the rear I/O CompactPCI interface, one of them switch-
able to the high-speed I/O extension connector, J7, for the CP3010-HDD
Serial
Two 16C550-compatible UARTs:
» COMA available either on the rear I/O or on the high-speed I/O extension con-
nector, J7, for the CP3010-HDD
» COMB or GPIO available on the rear I/O only
SATA
Two SATA 3 Gb/s ports:
» One SATA port either onboard for the SATA Flash or the CFast card, or on the
rear I/O
» One SATA port either on the rear I/O or on the high-speed I/O extension con-
nector, J7, for the CP3010-HDD
I/O Extension
Interfaces
I/O extension to 8 HP board version via the CP3010-HDD extension module:
» SATA 3 Gb/s for 2.5” HDD/SSD
» USB 2.0
» Gigabit Ethernet
» COMA
» Audio Line In
» Audio Line Out
» CAN
» Reset button
» HDD/SSD activity LED
So
ck
et
s
Front Panel Connectors
» DP: two standard DisplayPort connectors, J3 and J6
» USB 3.0: one standard 9-pin, type A connector, J8
» USB 2.0: one standard 4-pin, type A connector, J9
» Ethernet: one standard dual RJ-45 connector, J10A/B
Onboard Connectors
» CompactPCI connectors, J1 and J2
» CFast socket, J5 (optional)
» 60-pin, high-speed I/O extension connector, J7, for connection to the CP3010-
HDD extension module
» JTAG connector, J4
» XDP-SFF (debug) connector, J12
» SPI extension connector, J11
Table 1: CP3010-SA Main Specifications (Continued)
FEATURES
SPECIFICATIONS
