CP3002-HDD
CP3002
Page A - 4
ID 1042-9252, Rev. 2.0
P R E L I M I N A R Y
A.2
Technical Specifications
Table A-1: CP3002-HDD Module Specifications
CP3002-HDD
SPECIFICATIONS
Fr
ont
Panel
Interfaces
Serial Port
One 16C550-compatible serial port (COMA), RS-232; 9-pin D-Sub connector; J5
USB
Two USB 2.0 connectors, J2 and J4
DVI-D
One DVI-D connector with digital signals only, J1
Onboard
Interfaces
SATA
SATA connector, J3, for connecting a SATA 2.5” HDD/SSD
CFast
One CFast card socket, J6
Board-to-Board
One high-speed I/O extension connector, J7, for connecting the module to the
CP3002
Indicators/
Switches
HDD LED
One LED (green) monitors SATA activity
Front Panel Switch Reset button, guarded
General
Power Consumption Power consumption without hard disk, CFast card and peripheral devices connected:
100 mA at 3.3 V
Temperature Range Operational:
0°C to +60°C
Standard
Storage: -55°C to +85°C
Without hard disk and without battery
-40°C to +65°C
With hard disk
Climatic Humidity
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Dimensions
Dimensions: 100 mm x 158 mm
Board Weight
482 grams (8 HP CP3002 with CP3002-HDD, heat sink, front panel, two 2 GB
SODIMM memory modules and battery, but without CFast card and 2.5” HDD/SSD)
Battery
3.0V lithium battery for RTC with battery socket. Recommended type: CR2025
Temperature ranges:
Operational: -20°C to +70°C
typical (refer to the battery manufacturer’s specifica-
tions for exact range)
Storage: -55°C to +70°C
typical (no discharge)
Note ...
When a battery is installed, refer to the operational specifications
of the battery as this determines the storage temperature of the
CP3002-HDD module (See "Battery" below).
