CP6000
Introduction
ID 27942, Rev. 05
© 2005 Kontron Modular Computers GmbH
Page 1 - 5
2794
2.05.UG.VC.051020/17275
8
P R E L I M I N A R Y
1.2.2
Board-Specific Information
The CP6000 is a CompactPCI Pentium® M based single-board computer specifically designed
for use in highly integrated platforms with solid mechanical interfacing for a wide range of
industrial environment applications.
Some of the CP6000's outstanding features are:
• Supports all Intel® Pentium® M and Intel® Celeron® M microprocessors with 400 MHz FSB
• 479-pin µFCBGA package
• Up to 2048 kB L2 cache on-die, running at CPU speed
• 400 MHz processor system bus
• 855GME and 6300ESB chipset
• Up to 2 GB DDR SDRAM memory running up to DDR333 (PC2700)
• Integrated 3D high performance VGA controller
• Analog display support up to 2048 x 1536 pixels at 16-bit and 60 Hz
• PMC interface (64-bit/66 MHz PCI-X, 3.3V only) with rear I/O support and bezel cutout
on front panel and PCI-X functionality
• Four Gigabit Ethernet interfaces
• Two Gigabit Ethernet interfaces on the front panel
• Two Gigabit Ethernet interfaces on rear I/O (PICMG 2.16)
• Two EIDE Ultra ATA/100 interfaces
• Two Serial ATA interfaces on rear I/O, one thereof can be routed to onboard connectors
• Optional socket for 2.5" hard disk (only for standard temperature range)
• Onboard CompactFlash type II socket (True IDE)
• Four USB ports
• Two USB 2.0 ports on the front panel
• Two USB 2.0 ports on rear I/O
• 1 MB onboard FWH for BIOS
• Hardware Monitor (LM87)
• Floppy disk interface on rear I/O
• Watchdog timer
• Real-time clock
• Two COM ports on rear I/O (RS-232/RS-422/RS-485)
• I/O extension connector (LPC)
• 4HP, 6U CompactPCI
• Jumperless board configuration
• Extended temperature range: -40°C to + 85°C (optional)
• Passive heat sink solution for external airflow
• AMI BIOS
• PCI-X interface onboard (64-bit/66 MHz)
• Compatible with CompactPCI spec. Rev. 3.0 (32-bit/33 MHz)
• Hot swap capability: as system controller or as peripheral device
• Supports PICMG Packet Switching Backplane Specification 2.16
• Several rear I/O configurations
• Rear I/O on J3 and J5; optionally on J4
• IPMI compliant Baseboard Management controller
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
