COMe-bEP7 Module User Guide
www.kontron.com
// 10
Lithium Battery Precautions
If your product is equipped with a lithium battery, take the following precautions when replacing
the battery.
Danger of explosion if the battery is replaced incorrectly.
Replace only with same or equivalent battery type recommended by the
manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
General Instructions on Usage
In order to maintain Kontron’s product warranty, this product must not be altered or modified in
any way. Changes or modifications to the product, that are not explicitly approved by Kontron
and described in this user guide or received from Kontron Support as a special handling
instruction, will void your warranty.
This product should only be installed in or connected to systems that fulfill all necessary
technical and specific environmental requirements. This also applies to the operational
temperature range of the specific board version that must not be exceeded. If batteries are
present, their temperature restrictions must be taken into account.
In performing all necessary installation and application operations, only follow the instructions
supplied by the present user guide.
Keep all the original packaging material for future storage or warranty shipments. If it is
necessary to store or ship the product then re-pack it in the same manner as it was delivered.
Special care is necessary when handling or unpacking the product. See Special Handling and
Unpacking Instruction.
Quality and Environmental Management
Kontron aims to deliver reliable high-end products designed and built for quality, and aims to
complying with environmental laws, regulations, and other environmentally oriented
requirements. For more information regarding Kontron’s quality and environmental
responsibilities, visit http://www.kontron.com/about-kontron/corporate-
responsibility/quality-management.
Disposal and Recycling
