7. Features
PCI-960 – User’s Manual (V1.02)
11
7.1.1.12.
Multifunction Connector
•
One hard drive activity LED for all IDE devices
•
Power LED
•
Keyboard & Mouse
•
Reset switch
7.1.1.13.
Connector for Power Buttons
•
2-pin connector for additional power button
Power Button Control:
If an ATX power supply is used, the SBC can control it either through:
❏
the backplane via PICMG 1.3 edge connector or,
❏
its additional power button connector (J34) or,
❏
the jumper for power button configuration (JP1) or,
❏
the hardware monitor connector (J17) power button (PWRBT#) input.
7.1.1.14.
MiniPCI-Interface
Single MiniPCI Type IIIA connector
•
3.3 V / 5V (Mini PCI card must be 5 V tolerant)
•
The additional USB signals on reserved pins for bluetooth
are not supported
7.1.1.15.
PICMG PCI -Interface
32-bit/33 MHz PCI-Interface according to PCI Specification v2.3
•
Supports 5V PCI backplanes
•
Support for up to four PCI-masters
7.1.1.16.
LAN
Two REALTEK 8111B Gigabit Ethernet Controllers for PCI Express x1 interface
•
Two RJ45 connector on I/O panel with integrated LEDs
•
Configurable 48 KB deep buffer
•
Wake-on LAN (WOL) power management support
•
Package: 64-pin QFN
One REALTEK 8110S Gigabit Ethernet Controller for PCI 32bit, 33MHz
•
Routed to the PICMG1.3 edge connector
•
Wake-on LAN (WOL) power management support
7.1.1.17.
Audio
Realtek ALC655, AC’97 2.3 Audio Codec
•
Available on boxed header on board for Line-In, Line-Out, Microphone
•
ATAPI-style CD-ROM audio connector (CD-IN)
•
SPDIF-In and SPDIF-Out header for coaxial and/or optical fiber connection via an adapter cable with slot mounting
bracket (not included)
•
A 47 Ohm inductive speaker is mounted on the board
