Kontron Embedded Computers PCI - 960 User Manual Download

Page: 57 / 86

11. AMI BIOS Configuration

PCI-960 – User’s Manual (V1.02)

Advanced ACPI Configuration

11.3.6.3.

ACPI Versions Features

This option allows you to set the corresponding ACPI version. It is possible to choose between:

ACPI v1.0

ACPI v2.0

and ACPI v3.0.

11.3.6.4.

ACPI APIC support

This option determines whether or not to include the ACPI APIC table pointer to the RSDT pointer list.

It is possible to choose between:

Enabled

and Disabled.

Enabled

This setting will initiate ACPI APIC support.

Disabled

This setting disables ACPI APIC support.

11.3.6.5.

AMI OEMB table

This option allows you to include the OEMB table pointer to R(X)SDT pointer list.

It is possible to choose between

: Enabled

and Disabled.

Enabled

This setting enables adding an OEMB table.

Disabled

This setting disables adding an OEMB table.

OEMB table is used to pass POST data to the AML code during ACPI O/S operation. It is required for

proper functionality.

11.3.6.6.

Headless mode

This option is used to update the ACPI FACP table to indicate headless operations.

It is possible to choose between: Enabled and

Disabled

Enabled

This option enables updating the ACPI FACP table to indicate headless operation.

Disabled

This option disables updating the ACPI FACP table to indicate headless operation.

Summary of Contents for PCI - 960























































































Search results

Summary of Contents for PCI - 960

Reviews:

Related manuals for PCI - 960

Brands by name

Popular brands

Kontron Embedded Computers PCI - 960, User Manual

Search results

Summary of Contents for PCI - 960

Reviews:

Related manuals for PCI - 960

Brands by name

Popular brands