www.ks-power.de/en
|
14
MODELS WITH VTS SYSTEM VTS
MODELS WITH VTS SYSTEM VTS
Models named “1/3” are equipped with a VTS phase switching system. These models can operate in single-
phase (230V) and three-phase (400V) almost without loss of power.
An overload may lead to automatic activation of genera-
tor protection machine. Reduce the load. Reconnect the
generator no earlier than 5 minutes after switching off.
ATTENTION - DANGER!
Works, specified in “Technical maintenance” section, are to be regularly performed. If the the generator
user has no possibility to perform regular maintenance independently, it is necessary to address the official
service center to registrate an order for such works performance.
TECHNICAL MAINTENANCE WORKS
10
Switching modes is only allowed when the load is com-
pletely switched off.
IMPORTANT!
In case of any damages, occurred due to non-perfor-
mance of regular maintenance works, the manufacturer
bears no responsibility for such damages.
IMPORTANT!
SUCH DAMAGES ARE ALSO:
SUCH DAMAGES ARE ALSO:
• Damages occurred as a result of using non original spare parts;
• Corrosion damages and other results of improper equipment storage;
• Damages occures as a result of maintenance performance by inexperienced and unauthorized specialists.
MANUAL COMPLIANCE
MANUAL COMPLIANCE
Technical maintenance, operation and Könner & Söhnen
®
generator storage are to be performed according
to this manual recommendations. Manufacturer bears no responsibility for damages and losses, caused by
incompliance to safety requirements and technical maintenance rules.
FIRST OF ALL THIS APPLIES TO:
FIRST OF ALL THIS APPLIES TO:
- use of lubricants, gasoline and motor oils, forbidden by the manufacturer;
- device technical alterations;
- equipment operations against its intended use;
- indirect damages, caused by operating faulty equipment;
This manual compliance! You can find a list of service center addresses on the website of exclusive importer:
www.ks-power.de/en
Summary of Contents for KS 6100HDE
Page 22: ......
