Könner & Söhnen KS 6100HDE, Instruction

Page: 10 / 23

www.ks-power.de/en |
9
Model
KS 9300DE ATSR Super S
(EURO V)
KS 9302DE ATSR Super S
(EURO II)
KS 9300DE-1/3 ATSR Super S
(EURO V)
KS 9302DE-1/3 ATSR Super S
(EURO II)
Voltage, V 230 230 400
Max Power, kW 7.5 6.5 7.5
Nominal Power, kW 7.0 6.0 7.0
Frequency, Hz 50 50
Current max, A
32.6 28.26 13.54
Outlets 1х32А, 2х16А 1*32А, 1*16А (3p)
Fuel tank volume, l 20 20
50% power working time, h* 11.1 11.1
LED display voltage, frequency, working hours
Noise level L
PA
(7m)
/L
WA
, dB
64/89 64/89
Power output V/А 12/8.3 12/8.3
Engine model
EURO II
KS 520HD
EURO V
KS 520HD-V
EURO II
KS 520HD
EURO V
KS 520HD-V
Engine type diesel powered one-cylinder, four-stroke air-cooled
Engine power, hp 18.0 18.0
Crank case volume, cm
3
1.65 1.65
Engine cylinder volume cm
3
498 498
Power output controller AVR AVR
Fuel heater + +
Engine start electro electro
Power factor, cosφ 1.0 (230V) 1.0 (230V) 0.8 (400V)
Housing
soundproof housing
Battery, Ah 30 30
Output for ATS + +
Dimensions (L*W*H), mm 1080x550x800 1080x550x800
Net weight, kg 165 168
Protection class
IP23M IP23M
Altitude (MAX), m 1000 1000
Relative humidity <95% <95%
Acceptable deviation of a current is 10%
*Fuel consumption depends on many factors, such as load, fuel quality, season, altitude, technical
condition of the generator.
LwA is sound power level. This indicator is measured in the immediate vicinity of the noise maker.
LpA is sound pressure level. This indicator is calculated as a function of the distance between the
operator and the noise source. At a distance of 7 m: LpA (7) dB = (LwА - 25) dB
The optimum operating conditions are ambient temperature of 17°C – 25°C, barometric pressure of 0.1
MPa (760 mm Hg), and relative humidity of 50 – 60%. Under such ambient conditions, the generator can
guarantee maximum performance in terms of the stated specifications. In case of deviations from the above
ambient values, the performance of the generator can be different.
Please note that in order to preserve the lifespan of the generator, continuous loads should not exceed
80% of the rated power.