Könner & Söhnen KS 600RTG, Manual

Page: 3 / 31

Before operating the tiller, please read carefully the operating instructions. Do not allow other people and
children to use the device. Do not use the appliance in close proximity to the work area of adults, children
and animals – the responsibility for accidents and property is borne by the tiller user. The Könner & Söhnen
gasoline tiller meets the safety requirements of the current European standards. In no case do any changes
to the design of the appliance.
WARNING THESE REQUIREMENTS FOR WORKING WITH THE TILLER:
WARNING THESE REQUIREMENTS FOR WORKING WITH THE TILLER:
1. Read this manual before starting to work with equipment. Keep it for the future, follow the
recommendations contained in it, as this will help prevent injury and damage to the device.
2. Familiarize yourself with the tiller management and its functions. In the event of unforeseen circumstances,
the operator must know how to stop the tiller’s working parts and its engine.
3. The operator of the device must be in good physical and mental state, must be able to quickly make
decisions if necessary. It is forbidden to work with a tiller after drinking alcohol, drugs or taking
medications that can slow down the reaction.
4. The tiller is intended for use with soil during sowing, as well as for the care and treatment of plants. The
use of a tiller for other purposes is forbidden.
WORKING WITH THE TILLER
WORKING WITH THE TILLER
The device must be turned on according to the instructions in this manual. Ensure that the tiller is safely
spaced from the legs. Do not place your feet or hands on rotating items or underneath them. In order to lift
the device, two people have to take up the handle and the tiller shafts. Wear special gloves for protection
of hands and protective shoes, do not work with a tiller in an open shoe.
1. Parking leg bracket
2. Engine
3. Gear lever
4. On / off switch
5. Adjusting the engine speed
6. Clutch handle
7. Additional clutch handle for model
KS 7HP-1050G
8. Tool case
9. Operator panel
10. Operator panel adjustment lever
11. Coulter
12. Wing
13. Pneumatic wheels
14. Blade
1. Transport wheel
2. Engine
3. Operator panel adjustment lever
4. Adjusting the engine speed
5. On / off switch
6. Clutch handle
7. Operator panel
8. Coulter
9. Wing
10. Pneumatic wheels
11. Blade
1. Adjusting the engine speed
2. Movement control knob
3. Blade control knob
4. The inner part of the wing
5. The outer part of the wing
6. Clutch handle
7. On / off switch
8. Fastening of a steering column
9. Engine
10. Engine protection
11. Steering column
12. Coulter
13. Blade
14. Wheels
KS 7HP-1050G, KS 9HP-1350G-3
– see picture 5 and picture 4 in the Appendix.
KS 7HP-1000G – see picture 6 and picture 4 in the Appendix.
KS 600RTG – see picture 7 and picture 4 in the Appendix.
Fig. 5
Fig. 6
Fig. 7
SAFETY TECHNIQUE
2
Illustrations are for reference only and may
vary with the cultivator model.
konner-sohnen.com
| 2