KONLEN TECHNOLOGY LIMITED
Website: www.konlen.com
U1 building, Oriental Garden, NanShan District, Shenzhen City, Guangdong Province,China
Tel: +86-(0)755-86082432 E-mail:
MSN:
Skype: securitykonlen
7
The coding mode ends 20 seconds later automatically, and system enters into working mode, status LED light on panel
will change to yellow, then to green.
2) Add sensors into inner defense zone. (Detectors in this zone are ready to work when you set Out Arm, and will not
work when you set Home Arm)
When the GSM host begins to be powered on, the status LED light on panel will be red. Push the reset button for one
second, the status LED light will light up in orange for 20 seconds. This is code learning mode of inner defense zone.
You can trigger the sensors or detectors, the LED will flash in red to show it is coded successfully into inner defense
zone.
For above operation, the host will exit code learning mode 20 seconds later automatically, and enters into working
mode, the light on panel changes to orange to search for GSM network, then to green.
Note: If there were 4 wireless sensors in the host, stand for zone 1 to zone 4, then the new added sensor will be 5th
zone in the host.
How to cancel the lost detectors?
In case some of the coded detectors are lost, you can cancel the coded information of this detector so that it can not
control your alarm system. Follow the below operation to reset the alarm system:
Keep pressing the reset button, then power on the system. Siren beeps once or LED flashes once, it shows reset is
successful. All registered detectors have been deleted. You can register them again with the above mentioned process.
System reset will not change SMS message.
SOME NOTES:
1) About (SIGNAL) light
(SIGNAL) light keeps on red in 20 seconds after the host is powered on, wireless detectors can be coded into the host
this time. The light flash in red if coded successfully. 20 seconds later, (SIGNAL) light flash in orange to show it starts
to search for GSM network. If (SIGNAL) light still flashes in orange, it shows SIM card is fixed incorrectly or GSM
network is poor. If (SIGNAL) light still on in green, it shows no name or phone numbers in SIM card. If every thing is
ok, (SIGNAL) light will flash slowly in green (out arm mode) or flash quickly in green (home arm mode), or keeps on
in green (disarm mode). If alarm happened, (SIGNAL) light will flash in red and start to dial out and send SMS.
2) About (OUTPUT) light
If host O1 output high (+5V), the OUT 1 light will be on; If host O2 output high (+5V), the OUT 2 light will be on;
3) About (TALK) light (OUTPUT 3)
If the host speaker is in working mode, the output 3 will be on, showing you can talk or speak to scene.
4) About (RELAY) light
If 2 outputs of the relay on the host is connected, the relay light will be on; otherwise will be off.
5) About (SIREN) light
If the host siren is sounding, the siren light will be on.
6) About (MONINTOR) light
If the monitor function is opened, the monitor light will be on. If the monitor function is closed, the monitor light will
be off.
Standard components and optional available components