Konica Minolta SU-501, User Manual

Page: 106 / 306

4
Scan to PC operations
4-30 bizhub 350/250 (Phase 2.5)
4.7 Registering a destination
Programming a one-touch dial button
If a recipient is registered with a one-touch dial button, the transmission can
be sent easily and accurately.
Two types of recipients can be registered with a one-touch dial button: a
main recipient and a secondary recipient, where the data is sent if the
transmission to the main recipient fails.
2
Note
If "Restrict One-Touch Editing" on the Administrator Set screen
(displayed from the Administrator Management 1 screen) is set to "ON",
if software switch settings were specified to limit registration of one-
touch dial buttons to the administrator, or if "Enhance Security" is set to
"ON", one-touch dial buttons can only be registered, edited or deleted
from Administrator mode. For details on the settings in Administrator
mode, refer to the User manual [Facsimile Operations]. For details on the
software switch settings, refer to "Specifying software switch settings
(machine functions)" on page 8-11.
!
Detail
Any of the following communication modes can be specified for the
secondary recipient.
- PC (E-Mail)
- PC (Scanner)
- InternetFAX (Internet FAX)
- InternetFAX (IP-TX)
- InternetFAX (IP Relay)
- FAX (G3)*
* The communication mode can be specified if the optional fax kit is
installed.
2
Note
Certain communication modes may not be available, depending on the
machine settings. For details, check with the administrator.