ScanDIVA User’s Guide
3-10
2.3
Aging - 10min
This adjustment is to stabilize the lamp and the CCD.
NOTE
!
It will take time until the lamp is stable especially in the morning in
winter. In such a case, repeat the “Aging – 10min” procedure at least
twice.
1
Launch the application and the ScanDIVA TWAIN Driver.
2
Check “Adjustment” on the screen of the ScanDIVA TWAIN Driver.
3
Select “2. Aging - 10min” on the pull-down list under “Detail & Adjustment”,
and then click “Run”.
4
Click “OK” on the confirmation screen.
Summary of Contents for ScanDIVA
