Konica Minolta ScanDIVA User Manual Download

Page: 34 / 104

ScanDIVA User’s Guide

3-4

When the installation screen appears, click “ScanDIVA Ver.*.*.*.*” to begin
driver installation.

NOTE



Completes the installation of the TWAIN Driver first when the
Application is installed, and, next, click "ImageDIVA Touch Ver.*.*.
*. *".



Please refer to User's Guide of ImageDIVA Touch for the
installation and the operation of the Application.



Version of the Application and the Driver might be different from
the screen display.



The 32-bit version of the driver will automatically be installed in a
32-bit OS and the 64-bit version of the driver will automatically be
installed in a 64-bit OS.

If the “User Account Control” screen appears, click the “Yes” button.

NOTE

This screen may not be displayed, depending on the settings of the
computer.

Summary of Contents for ScanDIVA









































































































Search results

Summary of Contents for ScanDIVA

Reviews:

Related manuals for ScanDIVA

Brands by name

Popular brands

Konica Minolta ScanDIVA, User Manual

Search results

Summary of Contents for ScanDIVA

Reviews:

Related manuals for ScanDIVA

Brands by name

Popular brands