Konica Minolta Printer Copier User Manual Download Page 92

Page: 92 / 168

Advanced Copying

6-10

Konica 7115/7118

6.3

Erasing Part of Original Image (Margin Erase)

The copier erases a margin of a set width along the edges or erases any other unwanted imag-
es. One of the following four different erase functions can be selected:

What is Left Erase?

➜

A given width is erased from the left edge of the copy.

What is Upper Erase?

➜

A given width is erased from the top edge of the copy.

What is Frame Erase?

➜

A given width along all four edges is erased.

What is Center Erase?

➜

A given width is erased down the center.

✎

Note
The Center Erase setting is available only when Book Copy is selected.

Original

Copy

Original

Copy

Original

Copy

Original

Copies

Konica7115_7118.book Page 10 Friday, October 19, 2001 12:02 PM

Summary of Contents for Printer Copier









































































































































































Search results

Summary of Contents for Printer Copier

Reviews:

Related manuals for Printer Copier

Brands by name

Popular brands

Konica Minolta Printer Copier, User Manual

Search results

Summary of Contents for Printer Copier

Reviews:

Related manuals for Printer Copier

Brands by name

Popular brands