Konica Minolta Printer Copier User Manual Download Page 88

Page: 88 / 168

Advanced Copying

6-6

Konica 7115/7118

Sorting

The copies are automatically divided into sets with each set containing a copy of each page.
The following three types are available: electronic sorting, shift sorting, and crisscross sorting.

What is electronic sorting?

Important

✔

The copier must be equipped with an Automatic Document Feeder and a 16MB Memory for
Copier or 32MB Memory for Copier.

➜

The copies are sorted into complete sets of the originals.

What is shift sorting?

Important

✔

The copier must be equipped with an Automatic Document Feeder and a Shifting Unit.

➜

The sorted copy sets are stacked in the same direction,
but in a sawtooth manner by shifting the tray for each set.

Konica7115_7118.book Page 6 Friday, October 19, 2001 12:02 PM

Summary of Contents for Printer Copier









































































































































































Search results

Summary of Contents for Printer Copier

Reviews:

Related manuals for Printer Copier

Brands by name

Popular brands

Konica Minolta Printer Copier, User Manual

Search results

Summary of Contents for Printer Copier

Reviews:

Related manuals for Printer Copier

Brands by name

Popular brands