Konica Minolta Minoltafax 1100, User Manual

Page: 93 / 123

9 Trouble-shooting
9-2 MF 1100 Rev. 1.1.1/07.06.99
9.2 Problems when sending a fax
9.3 Problems when receiving a fax
Problem description Possible cause / solution See
Fax transmission is not possible. The document has not been drawn
into the machine. Page 4-3
The receiving fax machine is not
ready to receive. –
The receiving fax machine is been
programmed for manual reception. –
Problem description Possible cause / solution See
Despite calling signal, it is not
possible to receive a fax. Your fax machine is set for manual
reception. List up the telephone
handset and press the [START] key. Page 5-2
The power plug is not correctly
inserted. Page 2-7
It is not possible to receive a fax. There is no paper in the paper
holder. Page 2-11
Selective reception has been
activated. Check setting of software
switch 26. Page 5-4
The print-out is very pale. The ink cartridge is almost empty.
Install a new ink cartridge. Page 9-6
The print-out is blank. The ink cartridge is totally empty.
Install a new ink cartridge. Page 9-6
The ink cartridge is not correctly
installed. Page 9-6
The protection tapes were not fully
removed from the ink cartridge. Page 9-6
The document was placed upside
down in the sending fax machine. –
The fax print-out contains illegible or
warped letters. The telephone line is of poor quality.
If this problem frequently occurs,
inform your local service centre. Page 4-17
The fax print-out contains
blank lines or spots. The ink cartridge is not correctly
installed. Page 9-6