Konica Minolta Magicolor 7300, Reference Manual

Page: 85 / 334

Installation Steps
77
Installing XPDQ
XPDQ is automatically installed with PDQ.
Adding A Printer
1
Copy the printer driver to the directory /etc/pdq/drivers.
2
From the command line, type xpdq.
3
From the menu, choose printer, and then choose
Add Printer
.
The wizard starts.
4
Enter a printer name.
This can be any name you want.
5
Select the printer driver for your printer from the list.
6
Enter the interface that is being used. (i.e.: /dev/lp0).
Installing CUPS (from an RPM)
1
The current lpd print system must first be uninstalled. Instructions for
uninstalling lpd are found below.
2
Download CUPS 1.1.1 or newer from http://www.cups.org.
3
Type rpm -i cups-x.x.x-linux-x.x-intel.rpm (use the name of the RPM you
have).
Uninstalling lpd
As root, from the command line, type the following:
rpm -e printtool-3.44-1
rpm -e rhs-printfilters-1.63-1
rpm -e lpr
"#
The version numbers listed may be different than yours.
Adding A Printer
CUPS provides two methods for adding printers: a command-line program
called lpadmin and a Web interface. The lpadmin command allows you to
perform most printer administration tasks from the command-line and is
located in /usr/sbin. The Web interface is located at: http://localhost:631/
admin and steps you through printer configuration.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500