Konica Minolta Magicolor 7300, Reference Manual

Page: 111 / 334

Installing the KONICA
MINOLTA Crown Print
103
3
Type the Internet Protocol Address for the port.
This address is either the unique host name or the dot notation identifier
(IP address) of your printer.
If an invalid or previously used IP address (host name or dot notation
identifier) is given, the following message displays:
If you receive this message, you must do one of the following:
a Select No and type another valid IP address (this is what we
recommend).
b Select Yes and add this address in the Network Host Name file on
your computer before you send any print jobs to the port. If a print job
is sent to the port before the address is entered in the Network Host
Name file, the job does not print.
c Select Cancel to abort adding the port and to exit from the Add Port
dialog box.
4
Select the Advanced button.
The Configure Crown Printer dialog box appears. Follow the configuration
instructions in “Configure the Port” on page 104.
5
Select OK .
The Configure Crown Port dialog box closes.
?
What’s a Host Name?
A symbolic name (a
convenient way for people
to refer to a host) that
identifies network devices
on your computer. This
name must exist in your
Network Host Name file
and must be unique.
?
What’s Dot Notation?
A unique set of four
numbers (triplets),
separated by periods,
which identifies a 32-bit
device address on the
Internet. For example,
191.45.105.227 (note that
leading zeroes are not
used).
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500