Konica Minolta Magicolor 7300, Reference Manual

Page: 164 / 334

Using KONICA MINOLTA
NDPS Snap-in Controls
156
Printer Control Dialog
The KONICA MINOLTA
Printer Control dialog gives
you access to
!
Printer identification,
including installed features
of each printer
!
Printer status
!
Print job monitoring
!
Spooling configuration
!
Print management,
including
% Job holds
% Notification
% CrownView and Telnet access
The buttons on the Printer Control dialog give you access to all of the
KONICA MINOLTA NDPS component features. For additional information,
see the online help available from each dialog.
Identification Opens the Printer Identification dialog, which displays
general information about the printer and NDPS
configuration, and allows you to select from available
Printer Control DLL Names.
Features Opens the Features dialog where you can access
printer configuration and support service information.
Jobs Displays a submenu that allows you to open the NDPS
Job List dialog and the Spooling Configuration dialog.
Pause Output Sends a command to the server to pause printer
output. No print jobs are printed while the printer output
is paused.
After selecting Pause Output, the button is replaced
with a Resume Output button. Selecting Resume
Output removes the pause and allows print jobs to be
printed.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500