Konica Minolta IP-711, User Manual, Page: 37 / 209

4. Settings Required for Network Printing
28
•
NetWare 3.2 remote printer mode settings
1. Log on to the NetWare server, in which PServer is to be registered, by the
Supervisor right.
2. Start Pconsole.
3. Select “Print Queue Information” from “Available Options” and then press
“Enter.”
4. Click “Insert,” type “Print Queue Name,” and press “Enter” to register the [print
queue name].
5. Press “Esc” to return to “Available Options.”
6. Select “Print Server Information” and press “Enter.”
7. Press “Insert,” type “Print server name” in “New print server name,” and click
“Enter” to register the [print server name].
8. Select the print server, which has been created, and press “Enter” to display the
“Print Server Information” menu.
9. Select “Print Server Configuration” from the “Print Server Information” menu
to display the “Print Server Configuration Menu.”
10. Select “Printer Configuration” and press “Enter” to display the “Configured
Printers” list.
11. Select “Not Installed” at the top row and press “Enter” to display “Printer 0
configuration.”
12. Change the printer name in the “Name” column to “IP-711” and press “Enter” to
validate the change.
13. With the “Type” column selected, press “Enter.” Then, select “Remote Parallel
LPT1” and press “Enter” to validate the selection.
14. Press “Esc” to save the settings.
15. Press “Esc” once again to return to “Print Server Configuration Menu.”
16. Select “Queues Serviced by Printer” and press “Enter.”
17. Select “IP-711” created in step 12 from the “Defined printer” list and press
“Enter.”
18. Press “Insert” to display the “Available Queues” list of the printer.
19. Select the print queue prepared in step 4. Specify priority using a corresponding
number, 1 being the top priority and 10 being the lowest. Then, press “Enter” to
validate the selection.
20. Press “Esc” to quit Pconsole.
21. At the NetWare server console, load PSERVER.NLM.
*
For the queue user rights, printer notification option, assignment of multiple
queues, and password, see the document available for NetWare and set them as
necessary.