Konica Minolta IP-711, User Manual, Page: 14 / 209

5
2. Connecting the Cable
Make the cable connection between the PC and the controller by using the
appropriate cable for the specific connection scheme used.
If the copier is to be used in stand-alone environment, use the IEEE1284
(Centronics) or USB cable. If the copier is used in network environment, use the
network cable.
2.1 Connector Locations
(1) USB
(2) IEEE1284 (Centronics)
(3) Network
■
Connecting the Network Cable
1. Use the cable that complies with the 10Base-T or 100Base-TX standard.
Use Category 5 or 5E cables for the network cable.
2. When the cable is connected to the connector, LED1 turns ON.
[Description of the LEDs]
LED1: LINK = Lights if the network connection is established.
LED2: ACT = Blinks depending on the data reception status.
4334O034AA
(1)
(2)
(3)
LED1
LED2