Konica Minolta Fax 9930, User Manual, Page: 76 / 249

|
User’s Manual 61
Entering a PBX Dial Prefix
1 Press Menu/Exit to enter Menu.
2 Input speed access no. 50 (PBX Line), wait.
3 Press
¶
or
Ä
to select ON or OFF setting, press Enter.
4 Press
Ä
until you reach Dial Prefix, press Enter*.
5 Input the digit(s) normally dialed to obtain an outside line
from the PBX, press Enter.
6 Press Menu/Exit to return to standby mode.
* Dial Prefix can also be accessed from the main menu by
entering its speed access code 52.
!
Remember that all outside telephone numbers
programmed into the machine must begin with the dial
prefix of the PBX.
Clearing the PBX Dial Prefix
1 Press Menu/Exit to enter Menu.
2 Input speed access no. 50 (PBX Line), wait.
3 Press
¶
or
Ä
to select OFF setting, press Enter.
4 Press Menu/Exit to return to standby mode.