manualshive.com logo in svg

Konica Minolta Fax 9930, User Manual, Page: 127 / 249

Share
Download
Konica Minolta Fax 9930 User Manual Download Page 127

|

Konica FAX 9930

112

Send a Fax as Part of a Delayed Batch

1

Load the document(s).

2

Press Menu/Exit key to enter the menu.

3

Press 

Ä

 to select 

Delayed Batch TX

,  press Enter .

4

Enter the Speed Dial number of the desired location
using the assigned One Touch key or the numeric
keypad. Press Enter.

!

 Locations used for Delayed Batch Transmission must
be programmed into Speed Dial numbers
31 through 40.

5

Location and transmission time set displays. Press Start.

6

The machine scans the document(s) into memory, and
waits until the programmed time to begin transmission.

7

Repeat above steps 1-7 to prepare multiple sessions.

!

Use the 24-hour format to enter times.
For example, 0800 is 8:00 AM, 2000 is 8:00 PM.
The amount of available memory determines how many
batch transmissions you may set. Once memory is filled,
no more sessions will be accepted.

Summary of Contents for Fax 9930


























































































































































































































































Reviews:

No comments