Home
/
Konica Minolta
/
Fax 9930
/
User Manual

Konica Minolta Fax 9930, User Manual, Page: 157 / 249

Share

Page: 157 / 249

Konica Minolta Fax 9930 User Manual Download Page 157

|

Konica FAX 9930

142

Memory Polling (Bulletin)

During Memory Polling (Bulletin), remote machine(s)
contact your fax machine and request (poll) documents. The
documents are stored in specified personal mailboxes. The
remote machine(s) continue the request(s) until all stored
documents in the specified mailboxes have been retrieved.

1

To use bulletin polling, you must

2

Create Personal (Bulletin Polling) Mailboxes

3

Provide the Personal (Bulletin Polling) Mailbox address
(number) to the machine requesting documents. For
your machine, the address is the number (1 to 16) of the
mailbox.

!

Memory Polling (Bulletin) and Confidential Faxing
share the same 16 mailboxes.

Memory Polling (Bulletin) allows any number of remote
machines to contact your machine. The remote
machines can retrieve the document as many times as
needed.

Memory Polling (Bulletin) is designed to be repeated,
by multiple remote machines.

«
...
155
156
157
158
159
...
»

Summary of Contents for Fax 9930


























































































































































































































































Reviews:

No comments